酶注射式葡萄糖生物传感器建模方法研究

建立了酶注射式生物传感器的机理模型,并通过实验验证模型精确性.用传感器检测1和2 mg/mL葡萄糖溶液得到电压数据,通过数据拟合确定模型参数.将浓度值3 mg/mL带入模型得到预测曲线,再将其与传感器检测数据拟合后曲线进行比较,验证模型精确性.结果表明,参加反应的酶液米氏常数Km为1.97,数学模型与实际传感器工作模型相关系数(R2)为0.998.     

Microwave-assisted micro-solid-phase extraction for analysis of tetracycline antibiotics in environmental samples

In this study, a novel solid-liquid-solid extraction approach, which was termed ‘microwave-assisted micro-solid-phase extraction’ (MAE-μ-SPE), was developed. Target analytes were extracted from the sample into extraction solvent enhanced by microwave field, following adsorption by the adsorbent in the micro-solid-phase extraction device. Without any clean-up steps, the extracts were analysed by high performance liquid chromatography coupled with ultra-violet detector. The MAE-μ-SPE approach was developed for the extraction of four tetracycline antibiotics residues in environmental soil, sludge and atmospheric particulate matters. Variables affecting extraction procedures were systematically investigated. Low detection limits of 0.1–6.3 ng/g and low quantification limits of 0.33–20.7 ng/g were achieved under optimised conditions. The recoveries of antibiotics ranged from 70.6% to 110.5% with relative standard deviation of less than 15.1%. The predominance was showed when compared to conventional MAE and μ-SPE method. According to the results, MAE-μ-SPE was proved to be a simple and effective sample preparation method for the analysis of trace organic contaminants in environmental samples.     

镥晶体的绝热量热法测试和热力学函数

文章合成了Lu(NO₃)₃(C₂H₅O₂N)_4.H₂O,用红外和元素分析对其进行了表征。用高精度全自动绝热量热仪,测定了该配合物80-382 K温区的热容, 利用实验热容数据, 根据热容与焓、熵的热力学关系, 求出了配合物85-350 K温区内每隔5 K相对于298.15K的标准热力学函数(HT - H298.15)m和(ST - S298.15)m.在80-350 K温度区间内,配合物的热容随温度升高而增大,没有相转移点和热力学吸收峰的出现,该配合物在此温度区间内是稳定存在的。     

Cationic Cobalt(III)‐Catalyzed Aryl and Alkenyl CH Amidation: A Mild Protocol for the Modification of Purine Derivatives

A cationic cobalt(III)‐catalyzed direct C?H amidation of unactivated (hetero)arenes and alkenes by using 1,4,2‐dioxazol‐5‐ones as the amidating reagent has been developed. This transformation proceeds efficiently under external oxidant‐free conditions with a broad substrate scope. Moreover, 6‐arylpurine compounds, which often exhibit high potency in antimycobacterial, cytostatic, and anti‐HCV activities, can be smoothly amidated, thus offering a mild protocol for their late stage functionalization.     

地质环境样品中挥发酚分析现状与进展

挥发酚被列为环境优先控制的有机污染物,已成为评价环境污染的重要指标之一。该文简述了挥发酚的化学性质及地质环境来源,概括了国内外挥发酚测定的相关标准方法,从样品预处理技术和检测技术两方面综述了近年来地质环境样品中挥发酚分析的研究现状。重点对溶剂萃取、蒸馏、固相萃取、固相微萃取和吹扫捕集等样品预处理技术,以及4-氨基安替比林分光光度法、紫外和荧光分光光度法、溴化容量法、气相色谱法、液相色谱法和酚生物传感器法等技术在地质环境样品中挥发酚分析上的应用进行了较为全面的总结,并对其未来的发展趋势进行了展望,为进一步研究挥发酚的分析技术及其环境应用提供参考。     

SAXS and WAXD study of periodical structure for polyacrylonitrile fiber during coagulation

Small angle X‐ray scattering (SAXS) and wide angle X‐ray diffraction (WAXD) were adopted to investigate the formation and development of high order structure within polyacrylonitrile (PAN) precursor during coagulation. The scattering signal came from the microvoids and long period structure was separated reasonably by the analog computation method of decomposition of the one‐dimensional profile. Based on the established methodology, the statistic parameters of long period structure, such as length of the long period structure, crystalline region and amorphous region, were obtained by the analysis of correlation function. The results indicated that during the coagulation, the length of long period of the nascent coagulated fiber was 56.1 nm (meridional direction) and 35.6 nm (equatorial direction), respectively. The evolution of the long period during the coagulation was also discussed by combining WAXD data. With the processing of coagulation, the long period was decreased since the crystallinity increased. Copyright © 2014 John Wiley & Sons, Ltd.     

Effect of polyethylene glycol on the crystallization and impact properties of polylactide‐based blends

Polylactide (PLA) was plasticized by polyethylene glycols (PEGs) with five different molecular weights (M_w = 200–20,000 g/mol). The effects of content and molecular weight of PEG on the crystallization and impact properties of PLA were studied by wide‐angle X‐ray diffraction, differential scanning calorimetry, scanning electron microscopy, transmission electron microscopy, and V‐notched impact tests, respectively. The results revealed that PEG‐10,000 could significantly improve the crystallization capacity and impact toughness of PLA. When the PEG‐10,000 content ranged from 0 to 20 wt%, the increases in both V‐notched Izod and Charpy impact strengths of PLA/PEG‐10,000 blends were 206.10% and 137.25%, respectively. Meanwhile, the crystallinity of PLA/PEG‐10,000 blends increased from 3.95% to 43.42%. For 10 wt% PEG content, the crystallization and impact properties of PLA/PEG blends mainly depended upon PEG molecular weight. With increasing the M_w of PEG, the crystallinity and impact strength of PLA/PEG blends first decreased and then increased. The introduction of PEG reduced the intermolecular force and enhanced the mobility of PLA chains, thus improving the crystallization capacity and flexibility of PLA. Copyright © 2015 John Wiley & Sons, Ltd.     

A facile method for the synthesis of large‐size Ag nanoparticles as efficient SERS substrates

Silver nanoparticles (Ag NPs) enjoy a reputation as an ultrasensitive substrate for surface‐enhanced Raman spectroscopy (SERS). However, large‐scale synthesis of Ag NPs in a controlled manner is a challenging task for a long period of time. Here, we reported a simple seed‐mediated method to synthesize Ag NPs with controllable sizes from 50 to 300 nm, which were characterized by scanning electron microscopy (SEM) and UV–Vis spectroscopy. SERS spectra of Rhodamine 6G (R6G) from the as‐prepared Ag NPs substrates indicate that the enhancement capability of Ag NPs varies with different excitation wavelengths. The Ag NPs with average sizes of ~150, ~175, and ~225 nm show the highest SERS activities for 532, 633, and 785‐nm excitation, respectively. Significantly, 150‐nm Ag NPs exhibit an enhancement factor exceeding 10⁸ for pyridine (Py) molecules in electrochemical SERS (EC‐SERS) measurements. Furthermore, finite‐difference time‐domain (FDTD) calculation is employed to explain the size‐dependent SERS activity. Finally, the potential of the as‐prepared SERS substrates is demonstrated with the detection of malachite green. Copyright © 2016 John Wiley & Sons, Ltd.     

Simulation of ratcheting strain to a high number of cycles under biaxial loading

The Ohno–Wang kinematic hardening rule is modified to incorporate the Burlet–Cailletaud radial evanescence term for an improved simulation of the ratcheting behavior. The Delobelle parameter δ^′ is implemented in the modified model to compromise shakedown of the Burlet–Cailletaud hardening rule and over-prediction of the Ohno–Wang model. An evolution equation is proposed for δ^′ to simulate the ratcheting strain over an extended domain of cycles. Ratcheting tests were conducted on S45C steel under four types of nonproportional axial–torsional loading. The new model is found to yield reasonably accurate predictions of ratcheting strain to a much higher number of cycles compared with other studies.